Partner Spotlight

How to read a certificate of analysis: 5 checks before you trust a lab report

What a certificate of analysis really says about the product in front of you

A CERTIFICATE OF analysis (COA) is the most useful document a seller can give you, and one of the easiest to misread. A report that looks official can still belong to another product, another batch or another year. Whether you are looking at a CBD oil, a hemp extract or a kratom-derived research compound, the same five checks apply. They take about two minutes and tell you whether a lab report really supports the product in front of you.

1. Does the compound on the COA match the product name?

Start with the obvious. The COA should name the same compound the product is sold as, using the full chemical name. A CBD product should list cannabidiol. A product sold as “7OH” should list 7-hydroxymitragynine.

If the report names a different compound, or uses a vague term like “botanical extract” or “proprietary blend”, it does not document the product you are looking at. Compounds with similar names are not interchangeable. Mitragynine and 7-hydroxymitragynine, for example, differ by a single hydroxyl group, and that small difference makes them two distinct substances with separate entries in chemical databases such as PubChem.

2. Does the batch or lot number match your package?

This is the check most people skip. A COA describes one batch. Some sellers test a single batch and then keep showing that report for a year of production.

Look for a batch, lot or sample ID on the COA, then find the same number on the label or packaging. If the product has no batch number at all, the COA cannot be linked to it, however good the report looks.

3. Is the lab named, and can you find it?

A real COA names the testing laboratory, gives its address or contact details, and is signed or authorised by a named analyst. Many labs also list an accreditation such as ISO/IEC 17025, the international standard for testing and calibration laboratories.

Search for the lab yourself. If it has no website, or the report carries only the seller’s own logo, treat it as a claim made by the seller rather than independent testing.

4. Check the date and the method

Every COA should show a test date (often also a sample-received date) and a method, for example HPLC (high-performance liquid chromatography) or LC-MS (liquid chromatography with mass spectrometry). Two things to watch:

  • Age. A report from several years ago rarely matches current stock.
  • A method with no results table. The method name alone proves nothing. Look for the measured values, the units, and the limit of detection or quantitation.

5. Purity versus amount per unit: read the units

Results can be reported in different ways, and mixing them up is the most common reading error:

  • Percent (%) usually describes purity or concentration in a powder, oil or extract. “83%” means 83% of the sample’s weight is the named compound.
  • Milligrams per unit (mg/unit or mg/mL) describes the amount in one tablet, capsule or millilitre.
  • “ND” means not detected above the lab’s detection limit. It does not mean zero; it means below what that test can measure.

Check that the unit on the COA matches how the product is described. A tablet labelled in milligrams should have a per-unit result, not only a percentage.

Beyond the main compound: contaminant panels

A full COA often includes more than one page. Besides the main compound, many labs test for contaminants that matter for any plant-derived or processed product:

  • Heavy metals such as lead, arsenic, cadmium and mercury, usually reported in parts per million (ppm) or parts per billion (ppb).
  • Microbial contamination, including total yeast and mould counts and specific bacteria such as E. coli and Salmonella.
  • Residual solvents left over from extraction, such as ethanol, butane or hexane.
  • Pesticides, especially for products made from imported plant material.

Each result should sit next to a stated limit, with a clear pass or fail. A report that covers the main compound only is not necessarily a bad sign, but it tells you less. If contaminant testing matters to you, ask the seller whether a full panel is available for the batch.

Red flags worth noticing

  • The COA is a blurry screenshot with no lab name visible.
  • The same report appears on several unrelated products.
  • The seller will not send a COA when asked, or sends one only after an order.
  • The results are rounded to suspiciously neat numbers with no units.

A quick checklist

Before you trust a COA, confirm that:

  • the compound name matches the product;
  • the batch or lot number matches the package;
  • an independent lab is named and can be verified;
  • the test date is recent and a method is listed;
  • the results show values in the right units.

Reputable sellers make this easy. Canadian store Get7OH, for example, sends the certificate of analysis for the current batch of any product on request, so the batch on the report can be matched to the package. If a seller cannot answer the points above, that tells you more than any label.

This article is for general information only. It is not medical or legal advice.

Recent Posts

London Inc. Weekly

London Inc. Weekly: A summary of regional business news from the past week

3 days ago

Dispatch

Dispatch: A summary of recent business appointments and announcements, plus upcoming events for the week ahead

3 days ago

Here comes the 60-year career

As people live longer, healthier lives, the traditional 40-year career will become a thing of the past. Hope you like…

4 days ago

Best of London: Hangar9

Meet the 2026 Best Women’s Clothing Store: Hangar9

4 days ago

Are you sure you should be cutting those roles?

The AI boomerang: Why companies are rehiring the people they cut

5 days ago

Crafting a future

With the craft beer ­industry facing a changing industry, 4EST Brewery’s acquisition of Storm Stayed Brewing signals a new approach…

5 days ago